ثريا معمارية مخصصة
ثريا مسجد مخصصة – الموديل CH-0028 – تفصيل مشروع مخصص
ثريا مسجد مخصصة – الموديل CH-0028 – تفصيل مشروع مخصص is a made-to-order mosque chandelier reference for prayer halls and dome interiors. Diameter, height, ring or tier layout, finish, light-point arrangement and suspension are finalized from approved project drawings. Electrical load, voltage and structural fixing are confirmed before production.
Ring Distribution
Similar Mosque Chandelier References
Selected mosque projects matched by chandelier form, scale and installation character.
1 photo
2 photos
2 photos
3 photos
2 photos
2 photos
1 photo
1 photo
2 photos
1 photo
المواصفات الفنيةFull project data+
Product Identity
- Product Family
- ثريات المساجد
- Chandelier TypeEstimated
- ثريا معمارية مخصصة
- أسلوب التصميم
- إسلامي مخصص
- Recommended Application
- ثريا مسجد مخصصة مخصص لمشروعات المساجد
- الإنتاج
- تصنيع حسب الطلب
Dimensions & Suspension
- القطر الإجماليEstimated
- 4450 mm
- الارتفاع الكليEstimated
- 2050 mm
- Body HeightEstimated
- 1000 mm
- Suspension DropEstimated
- 1050 mm
- Minimum DropEstimated
- 750 mm
- Maximum DropEstimated
- 2100 mm
- Ring / Tier CountEstimated
- 1
- Ring DiametersEstimated
- 4450 mm
- Lamps per RingEstimated
- 44
- Center LampsEstimated
- 0
- Planning Lamp SpacingEstimated
- 320 mm
- Suspension StyleEstimated
- Straight multi-point cable suspension
- Ceiling / Dome TypeEstimated
- High prayer hall / dome ceiling
Lighting Performance
- Light SourceEstimated
- Replaceable LED filament lamp
- Lamp HolderEstimated
- E27
- Power per LampEstimated
- 7 W
- Lumens per LampEstimated
- 806 lm
- Driver Loss AllowanceEstimated
- 0 %
- Total LampsEstimated
- 44
- Total PowerEstimated
- 308 W
- Total LumensEstimated
- 35464 lm
- System EfficacyEstimated
- 115.1 lm/W
- درجة حرارة اللونEstimated
- 3000 K
- Color RenderingEstimated
- Ra 90+
- DimmingEstimated
- Phase-cut dimming, subject to lamp selection
- Driver / ControlEstimated
- Lamp-integrated electronic driver
- Light DistributionEstimated
- Symmetric direct / ambient distribution
- التحكم في الوهجEstimated
- Opal/frosted lamp option with balanced ring spacing
- UGR Targetخاص بالمشروع
- Project specific; verify by photometric calculation
Materials & Finish
- Primary Metal
- هيكل معدني
- التشطيب
- تشطيب معدني مخصص
- Finish OptionsEstimated
- Custom metal finish selected during project approval
- DiffuserEstimated
- Frosted acrylic or opal glass option
- شريط الخطEstimated
- اختياري / يُحدد حسب المشروع
- Decorative Pattern
- هندسة زخرفية إسلامية
- Crystal / GlassEstimated
- Optional optical glass or crystal accents
- Protective CoatingEstimated
- Powder coat or clear lacquer according to selected finish
- Decorative IntentEstimated
- Custom Islamic composition using islamic decorative geometry
Planning & Installation
- Reference Hall WidthEstimated
- 20 m
- Reference Hall LengthEstimated
- 20 m
- Mounting HeightEstimated
- 8.5 m
- Target IlluminanceEstimated
- 200 lx
- Utilization FactorEstimated
- 0.55
- Light Loss FactorEstimated
- 0.8
- Estimated CoverageEstimated
- 78 m²
- Estimated AverageEstimated
- 39 lx
- Assembly
- تصنيع معدني مخصص
- نطاق أعمال التركيبخاص بالمشروع
- Coordinated after verified site measurements and approved drawings
- Electrical Coordinationخاص بالمشروع
- Required with the project electrical and lighting design
- Ceiling Coordinationخاص بالمشروع
- Required with the dome / ceiling geometry and support structure
- Approved Drawing Status
- Required before production
- Material Sample Statusخاص بالمشروع
- Required for final material and finish where applicable
- Production Lead TimeEstimated
- 8–12 weeks after approved drawings
Technical DocumentsDrawings, installation and certificates+
Product description +
Custom Mosque Chandelier – Model CH-0028 is a made-to-order mosque chandelier reference for prayer halls and dome interiors. Diameter, height, ring or tier layout, finish, light-point arrangement and suspension are finalized from approved project drawings. Electrical load, voltage and structural fixing are confirmed before production.
Planning notes +
Entered total power is retained as the authoritative value instead of a per-lamp calculation. Entered total lumens are retained as the authoritative value instead of a per-lamp calculation. Coverage and lux values use the lumen method; they are not an IES/LDT photometric report.
Materials & finish +
Primary metal: Metal Structure. Finish: Custom Metal Finish. Diffuser: Frosted acrylic or opal glass option.
Installation & support +
Assembly: Custom Metal Fabrication. Installation scope: Coordinated after verified site measurements and approved drawings.
Warranty & care +
Warranty terms and final care instructions are confirmed in the approved quotation/contract and final material schedule.
English
German
Turkish
Russian
French
Arabic