Координация электрики
Chandelier Electrical, Dimming & Lighting Controls Guide
A custom chandelier should be electrically specified for the destination project before production. Voltage, frequency, drivers, dimming protocol, circuiting, CCT, CRI and maintenance access can change the final component selection.
Уточните электростандарт страны назначения
Projects may use 110–120V/60Hz, 220–240V/50Hz or another local standard. The chandelier should not be ordered on the assumption that all markets use the same lamps, drivers, dimmers or certification route. Destination country belongs in the first project brief.
Варианты управления
Фазовое регулирование яркости
Common in smaller and hospitality applications, but driver compatibility and minimum load should be checked.
0–10V
Used in many commercial projects and requires compatible control wiring and drivers.
DALI
Useful where the chandelier is integrated into a wider digital lighting-control system and scenes.
Коммутируемые электрические цепи
Large ring or multi-tier chandeliers can sometimes be zoned into separate circuits for flexible scene setting.
Качество и характеристики освещения
- Коррелированная цветовая температура
- Индекс цветопередачи
- Суммарная подключённая нагрузка
- Световой поток и оптическое распределение
- Расположение драйверов и доступ для замены
- Функция аварийного освещения, если предусмотрена
- IES/LDT or photometric information when required and available
Decorative chandeliers should normally be coordinated with the wider ambient and architectural lighting plan rather than expected to provide every lux requirement alone.
Документы для запроса
Depending on project scope, the final package may include wiring diagrams, lamp/driver schedules, circuit zoning, installation details and available technical files. Certification requirements must be agreed for the destination market before component approval.
Need electrical coordination for a chandelier project?
Send the country, voltage/frequency, control system and fixture concept with the architectural drawings.
Запросить проверку электрикиСхема электрического управления люстрами на заказ
Decorative lighting should be documented as an electrical system, not only as a fixture. Before production, define connected load, circuit arrangement, control method and the location of serviceable drivers or control gear.
- Prepare a circuit/load schedule for each chandelier or lighting zone.
- Confirm dimming protocol and compatibility between drivers, dimmers and control system.
- Place drivers and power supplies where they can be inspected and replaced without dismantling major decorative components.
- Coordinate emergency or backup-lighting requirements separately; decorative circuits should not be assumed to provide statutory emergency lighting.
- Record scene levels and final control settings during commissioning.
- For international projects, verify voltage, frequency, earthing and local certification with the responsible electrical team.
Связанные материалы: Руководство по напряжению · Проектирование инженерных систем.
English
German
Turkish
Russian
French
Arabic